pitch calbration

Welcome to Old Skool Anthems
The Old Skool Resource. Since 1998.
Join now

BOD

Moderator
Staff member
VIP Silver Member
Sep 4, 2007
1,392
7
38
51
over there
Does anyone know where I can get my deck given the once over? Got a feeling the pitch calibration is going in one, im constantly fighting against the speed to keep a mix in for longer than half way through a mix:S

I aint the best mixer but I know this is not just me having a bad spell, its been going on for nearly 4 weeks now:mad: and I cant tell summats not right.

Any help appreciated:thumbsup:
 

coggledots

New member
Aug 11, 2005
1,075
0
0
54
Harrogate
Think this is more of a new pitch slider needed than just calibrating? Calibrating just makes the zero be at zero (if that makes sense lol)

If it's straying off by itself, the actual slider is probably fecked. About £20 quid for a non-technics slider + fitting & calibration is what i used to pay years ago (but that was in Bradford, so sorry not that near you)
 

Barrie Jay

Active member
Jul 20, 2003
1,611
12
38
69
Fleetwood - twinned with Royston Vasey
Set it at zero and watch the little dots around the edge of the platter.

One row should stay absolutely still.

If not and they move constantly one way or the other you may just need the rotation adjusting - easy to sort.

If it doesn`t suspect the pitch control is suspect.

If they move slightly erraticly, that is stay still for a bit and then move a bit or if they move inconsistently this points to the pitch control needing replacement.

There could be a more serious impication that there is a problem with the circuits inside or the motor is screwed but this is highly unlikely with Technics.

If it is okay at zero pitch try it with the other markings on the platter (is it plus 3 and plus 5 ??? cannot recall) and repeat the procedure.

If your platter isn`t moving constantly at the same speed (as seems probable if your mixes are going out) this is the root cause of your problem.

Finding out what is causing it should be easy with these steps.